Sparkplasmasintering相关论文
本文采用气体雾化和放电等离子烧结相结合的工艺制备过共晶Al-40 wt.％Si合金.采用XRD、SEM、静水压天平、显微硬度计和万能拉伸试验......
采用低能球磨和放电等离子烧结法制备了石墨烯(GNPs)增强铜基复合材料.研究了石墨烯含量对复合材料微观结构和性能的影响.结果 表......
Bismuth-telluride (Bi2Te3) is considered to have the best thermoelectric properties at room temperature(ca.300 K).Thus,s......
Effects of (Ti, W)C Addition on the Microstructure and Mechanical Properties of Ultrafine WC-Co Tool
In this study,powder mixtures containing (Ti,W)C additions (10,20,30 and 40 wt％) were prepared and then consolidated at 1......
Microstructures and Tensile Properties of Ultrafine-Grained Ni-(1-3.5) wt％ SiCNP Composites Prepared
...
Magnesium and calcium phosphates composites are promising biomaterials to create biodegradable load-bearing implants for......
The ultrafine crystalline CuCr50(Cr 50 wt%) alloys were fabricated by a combination of mechanical alloying and spark pla......
...
The light woven carbon fibers reinforced aluminum alloy composite(CF/Al)was fabricated by spark plasma sintering(SPS).Be......
Zirconium carbide (ZrC) is a potential candidate for ultra-high temperature applications, due to its promising cohesive ......
Ptype Ga2Te5 based compounds with multiphase equilibrium were prepared by spark plasma sintering and their microstructur......
W-ZrC composites reinforced with Sc2O3 particles were produced through powder metallurgy(PM)and subsequent spark plasma ......
Fabrication and Tribological Properties of spark plasma sintered WC-Ni cermet containing WS2 solid l
Self-lubricated materials with low friction coefficients are needed in oil-free environment of space mechanisms and nucl......
FAST HYDROGEN GENERATION BY HYDROLYSIS OF CNT-ALUMINUM COMPOSITES FABRICATED BY SPARK PLASMA SINTERI
On-board hydrogen production from hydrolysis of aluminum (Al) is a low-priced method for supplying hydrogen directly int......
...
TiB-TiB2 ceramic composites were synthesized in situ by spark plasma sintering method at dif ferent temperatures.The mic......
Cu SbSe is a p-type semiconductor with a narrow band gap near 0.3 eV,and has been found to be a promising thermoelectric......
采用无压放电等离子烧结技术,用纳米TiC改性多壁碳纳米管(MWCNTs),将纳米TiC改性后的碳纳米管(T-CNTs)掺杂到中间相炭微球(MCMB)中......
Microstructural development and cracking evolution of Si3N4 nano-ceramics prepared by spark plasma s
Microstructural changes of Si3N4 in the matrix greatly influence the mechanical properties....
Microstructure and mechanical properties of spark plasma-sintered La2O3 dispersion-strengthened W-Ni
An investigation of lanthanum oxide (La2O3)addition to tungsten heavy alloy (WHA) with a ternary composition of W-7Ni-3F......
Sintering behavior of ZrB2 ceramic with nano-sized SiC dopant was studied.ZrB2-25 vol％ nano-sized SiC was selected as the......
ZrB2 ceramics with various hexagonal BN (hBN) additions up to 37 vol％ were reactively densified by spark plasma sintering......
Sliding wear behaviour of Fe/316L/430-Ti(C,N) composites prepared via spark plasma sintering and sub
A series of novel steel-Ti(C,N) composites was fabricated by spark plasma sintering (SPS) and subsequent heat treatment.......
Fabrication and property of high-performance Ag-Pb-Sb-Te system semiconducting thermoelectric materi
High performance Ag-Pb-Sb-Te system thermoelectric bulk materials were fabricated by a combination of mechanical alloyin......
